Projects
One of the most intesting projects we had, you can find below.
PCB board conveyor
According to the customer’s request, it was necessary to make a conveyor that will transfer the frame with loaded printed circuit boards from the production line end point to the tin bath in the shortest possible time, in order to
- save time in transport,
- prevent the risk of components falling out of the board and
- reduce the number of operators involved in the transport itself.
To this end, several functional units have been constructed and produced, interconnected into a PCB conveyor for the transport of loaded printed circuit boards.
The conveyor line consists of a receiving station and chain conveyor tasked to transfer frames with loaded printed circuit boards.
The line serves two production lines at the same time.
Board production is a continuous process, and the devices making up the conveyor line work in continuous mode as follows:
- the frame with loaded printed circuit boards is placed on the receiving station,
- it descends to the conveyor height,
- the mechanism transfers it to the conveyor,
- the conveyor takes it to the next barrier mechanism, where it is stopped by a sensor switch
- the operator selects which of the two barriers to lower by pressing the button, and the conveyor continues
- at the entrance to the tin bath, the operator pushes the frame to the next transport mechanism
This job of aligning the order of operations is performed by the control system.
All operations during the transport of boards to the entrance to the tin bath take place according to a preset program.
The line is managed by the operator.
The boards come from two production lines at the same time, and the operator determines the order in which they go to the bath.
Find Us
- Bulevar sv. Cara Konstantina 80-84, 18000 Niš | GPS: 43.303649, 21.95086
- +381 63 415462, +381 60 5250528
- office@niteramold.com
Company information
Our Clients
