Projects
One of the most intesting projects we had, you can find below.
Mixer for mixing liquids in a 200 l barrel
Some liquid substances need to be mixed before use in the technological process.
One type of transport packaging has openings with lids of such a size that it is possible to place some kind of mixer through them and prepare the contents for use.
The second type does not have openings of the appropriate size for the passage of the mixer, so the mixing of the contents must be done by moving the whole vessel.
At the request of the customer, it was necessary to create a device that would mix the contents by turning over the closed container.
A well-known concept has been adopted, according to which the vessel (metal or plastic barrel) is placed on a slightly inclined receiving surface, fixed to it and, by activating the mechanism, mixing begins.
The proposed device allows selection of the speed (within the agreed range) and the duration of mixing.
The basis of the construction is a robust chassis, which is used to hold the barrels and accommodate the power unit.
The drive is an electric motor with a reducer, which is connected by a chain drive to the shaft that drives the receiving platform.
The device is managed from the control cabinet. On it there are start and stop buttons, a button for selecting the turning speed, a time timer button and the main switch.
The starting position of the receiving platform is horizontal – for easy adjustment of the barrels – and at the same time it is the final position of each cycle. We determine the length of the cycle by choosing the working time on the timer, but we can interrupt it if necessary with the stop button.
In order to protect the operator, it is planned to place a protective fence around the machine. The work cycle can only be activated after the door of the protective fence is closed.
Due to the presence of dynamic forces during rotation, the machine is fixed to the base.
Features of the device:
Barrel height: (800-920) mm
Barrel diameter: (450-600) mm
Rotation speed: (5-20) rpm
Load capacity: up to 350 kg
Engine power: 1.5 kW/380 V, 2800 rpm
Dimensions of the protective fence: (2250x1350x1600) mm
Find Us
- Bulevar sv. Cara Konstantina 80-84, 18000 Niš | GPS: 43.303649, 21.95086
- +381 63 415462, +381 60 5250528
- office@niteramold.com
Company information
Our Clients
