Projects
One of the most intesting projects we had, you can find below.
Tipper machine
Tipper machine for pouring parts from the gitterbox.
Due to the heavy weight and quantity of parts in the gitterbox that need to be transferred to another gitterbox in order for the parts to go to the next processing stage, a Tipper machine was created that has the task of transferring parts from one box to another.
Only one operator is enough for the whole process. The operator will, first of all, place the gitterbox with a forklift or a pallet truck in a position inside the tipper machine that is in the initial, vertical position, and with the command, he will lift the box, which will be in the position from which the parts will be poured. The end position is set to stop 2 cm above the second gitterbox. Gravity will transfer the parts from one box to another box.
The device is managed from the control cabinet. There are three buttons for starting and stopping (start/stop). Two are for starting one or the other direction, while one is for stopping.
The drive is hydraulic.
The basis of the construction is a robust chassis, which is used to hold the gitterbox and accommodate the power unit. In the part where the gitterbox is located, steel profiles are placed as stops so that the gitterbox remains in the same position even after the end position of the tipper machine.
Due to the presence of dynamic forces during rotation, the machine is fixed to the base.
Find Us
- Bulevar sv. Cara Konstantina 80-84, 18000 Niš | GPS: 43.303649, 21.95086
- +381 63 415462, +381 60 5250528
- office@niteramold.com
Company information
Our Clients
